VLL Services
7705 SAR OS Services Guide Page 281
Service Access Points
Service Id Identifies the service
SAP Specifies the ID of the access port where this SAP is defined
Encap Specifies the encapsulation type for this SAP on the access
port
Admin State Specifies the desired state of the SAP
Oper State Specifies the operating state of the SAP
Flags Specifies the conditions that affect the operating status of this
SAP. Display output includes ServiceAdminDown,
PortOperDown, and so on.
Last Status Change Specifies the date and time of the most recent status change to
this SAP
Last Mgmt Change Specifies the date and time of the most recent management-
initiated change to this SAP
Dot1Q Ethertype Identifies the value of the dot1q Ethertype
LLF Admin State Specifies the Link Loss Forwarding administrative state
LLF Oper State Specifies the Link Loss Forwarding operational state
Admin MTU Specifies the desired largest service frame size (in octets) that
can be transmitted through this SAP to the far-end router,
without requiring the packet to be fragmented
Oper MTU Specifies the actual largest service frame size (in octets) that
can be transmitted through this SAP to the far-end router,
without requiring the packet to be fragmented
Ingr IP Fltr-ID Specifies the ingress IP filter policy ID assigned to the SAP
Egr IP Fltr-Id Specifies the egress IP filter policy ID assigned to the SAP
Ingr Mac Fltr-ID Specifies the ingress MAC filter policy ID assigned to the SAP
Egr Mac Fltr-Id Specifies the egress MAC filter policy ID assigned to the SAP
Acct. Pol Specifies the accounting policy applied to the SAP
Collect Stats Specifies whether accounting statistics are collected on the
SAP
Table 34: Show Service-ID All Command Output Fields (Continued)
Label Description
To Next Page
Loading...
