VLL Services Command Reference
Page 300 7705 SAR OS Services Guide
MTU Specifies the service MTU
SAP Count Displays the number of SAPs specified for this service
SDP Bind Count Displays the number of SDPs bound to this service
Service Access and Destination Points
Identifier Lists the SAP and SDP
Type Specifies the signaling protocol used to obtain the ingress and egress
labels used in frames transmitted and received on the SDP
AdmMTU Specifies the desired largest service frame size (in octets) that can be
transmitted through this SDP to the far-end edge services router (ESR),
without requiring the packet to be fragmented
OprMTU Specifies the actual largest service frame size (in octets) that can be
transmitted through this SDP to the far-end ESR, without requiring the
packet to be fragmented
Adm Indicates the operating state of the SAP or SDP
Opr Indicates the operating state of the SAP or SDP
Table 35: Show Service-ID Base Output Fields (Continued)
Label Description
To Next Page
Loading...
