Alcatel-Lucent 7705 - Page 301

VLL Services
7705 SAR OS Services Guide Page 301
egress-label
Syntax egress-label start-label [end-label]
Context show>service
Description This command displays services using the range of egress labels.
If only the mandatory start-label parameter is specified, only services using the specified label are
displayed.
If both start-label and end-label parameters are specified, the services using this range of labels are
displayed.
Use the show router ldp bindings command to display dynamic labels.
Parameters start-label — indicates the starting egress label value for which to display services using the label
range. If only start-label is specified, services only using start-label are displayed.
Values 0, 2048 to 131071
end-label — indicates the ending egress label value for which to display services using the label range
Default the start-label value
Values 2049 to 131071
Output
The following output is an example of service egress-label information, and
Table 36 describes the
fields.
Sample Output
*A:ALU-12# show service egress-label 0 131071
===============================================================================
Martini Service Labels
===============================================================================
Svc Id Sdp Binding Type I.Lbl E.Lbl
-------------------------------------------------------------------------------
1 101:1 Spok 131049 0
103 101:103 Spok 131067 131067
104 301:104 Spok 131066 131067
105 501:105 Spok 131065 131068
303 101:303 Spok 131064 131066
304 301:304 Spok 131063 131064
305 501:305 Spok 131062 131065
701 101:701 Spok 131059 131064
702 101:702 Spok 131058 131063
703 501:703 Spok 131057 131064
704 501:704 Spok 131056 131063
705 301:705 Spok 131055 131062
706 301:706 Spok 131054 131061
805 201:805 Spok 131053 131062
806 201:806 Spok 131052 131061
807 401:807 Spok 131051 131060
808 401:808 Spok 131050 131059