VLL Services Command Reference
Page 310 7705 SAR OS Services Guide
For. OutProf Indicates the number of out-of-profile packets or octets (rate above
CIR) forwarded, as determined by the SAP egress QoS policy
Sap per Queue stats
Ingress Queue n Specifies the index of the ingress QoS queue of this SAP, where n is
the index number
Off. HiPrio Indicates the number of packets or octets of high-priority traffic for
the SAP (offered)
Off. LoPrio Indicates the number or packets or octets of low-priority traffic for
the SAP (offered)
Dro. HiPrio Indicates the number of high-priority traffic packets or octets
dropped
Dro. LoPrio Indicates the number of low-priority traffic packets or octets dropped
For. InProf Indicates the number of in-profile packets or octets (rate below CIR)
forwarded
For. OutProf Indicates the number of out-of-profile packets or octets (rate above
CIR) forwarded
Egress Queue n Specifies the index of the egress QoS queue of the SAP, where n is
the index number
For. InProf Indicates the number of in-profile packets or octets (rate below CIR)
forwarded
For. OutProf Indicates the number of out-of-profile packets or octets (rate above
CIR) forwarded
Dro. InProf Indicates the number of in-profile packets or octets dropped for the
SAP
Dro. OutProf Indicates the number of out-of-profile packets or octets discarded
Eth-Cfm Configuration Information
Md-index Displays the value of the MD index
Direction Displays the direction of the MEP
Ma-index Displays the value of the MA index
Admin Displays the administrative state of the MEP (enabled or disabled)
MepId Displays the MEP-ID
CCM-Enable Displays the status of the Continuity Check Message (CCM)
Table 40: Service-ID SAP Output Fields (Continued)
Label Description
To Next Page
Loading...
