Alcatel-Lucent 7705 - Page 325

VLL Services
7705 SAR OS Services Guide Page 325
CcmSequenceErr Displays the number of CCM sequence errors
LbRxReply Displays the number of received loopback (LB) replies
LbRxBadOrder Displays the number of LB replies that have been received in the
wrong order
LbRxBadMsdu Displays the number of LB replies that have been received with the
wrong destination MAC address (MSDU = MAC Service Data
Unit)
LbTxReply Displays the number of LBRs (loopback replies) transmitted out
this MEP
LbNextSequence Displays the sequence number of the next LB transmission
LtNextSequence Displays the sequence number of the next Linktrace (LT) message
transmitted
LtRxUnexplained Displays the number of the unexplained Linktrace (LT) messages
Associated LSP LIST
Lsp Name Specifies the name of the static LSP
Admin State Specifies the administrative state of the associated LSP
Oper State Specifies the operational state of the associated LSP
Time Since Last Tr* Specifies the time that the associated static LSP has been in service
APIPE Service Destination Point specifics
Admin Concat Limit Specifies the administrative (configured) value for the maximum
number of cells for cell concatenation, as defined via the max-
cells command
Oper Concat Limit Specifies the operational value for the maximum number of cells
for cell concatenation
Peer Concat Limit Specifies the far-end value for the maximum number of cells for
cell concatenation
Max Concat Delay Specifies the amount of time to wait while cell concatenation is
occurring, as defined via the max-delay command
CPIPE Service Destination Point specifics
Local Bit-rate Specifies the number of DS0s used by the local SDP
Peer Bit-rate Specifies the number of DS0s used by the far-end SDP
Table 42: SDP Output Fields (Continued)
Label Description