Section 4 Operation
4-50
10. When the Traffic Band is changed to A800MHz under the following condi-
tions, the Handoff (CDMA → Analog) is performed. However, the
Handoff (Analog → CDMA) cannot be performed.
Conditions:
Using Specification: IS-95A
Control Band: C800 MHz
Traffic Band: C800 MHz
Call Proc.: Loop Back or Conversation
11. <Call Drop Threshold>
When the call is dropped at the Call Processing state of the “Loop Back” or
“Conversation”, “Idle” or “Idle (Regist)” is displayed. The timing to judge
the call drop, is set by the number of frames.
(The call drop state means that no signal of the mobile station is up-linked.)
The On/Off of this item selects the execution of this function.
12. <Echo Delay>
In voice communication state, this echo delay is set for returning the voice
from the MT8801C to the mobile station.
The delay time: 0 to 5 seconds can be set.
To Next Page
Loading...
