Section 4 Operation
4-68
2nd page
[Unit] F9: Displays the power measurement unit menu.
[dBm] F7: Sets the power measurement value unit to dBm (initial value)
[nW/µW/mW/W] F8: Switches the power measurement value unit to the watt system.
[return] F12: Returns to the previous menu.
[Level Rel./Abs.] F10: Displays the menu for selecting absolute or relative display of the waveform vertical
axis scale.
[Relative] F7: Sets the waveform vertical axis scale to relative display (dB).
This function key displays a relative value from the average power at burst-on
(initial value).
[Absolute] F8: Sets the waveform vertical scale to absolute display (dBm).
No template is displayed.
[return] F12: Returns to the previous menu.
[BS Output Level Cal.] F11: Performs the level calibration of the BS Output Level. During calibration, the output
signal becomes un-modulated.
[Back Screen] F12: Displays the previous screen.
To Next Page
Loading...
