Section 5 Measurement Examples
5-6
(25) Turn ON the CDMA mobile station power during this status. The CDMA mo-
bile station location is registered and the Call Proc. status changes to Idle
(Regist) (shown below) to become the waiting status after the location registra-
tion when the CDMA mobile station power is turned ON.
(26) Press the F2 (NW Originate) key.
(27) The Call Proc. status becomes Loopback (shown below).
The basic setting of the MT8801C and the CDMA mobile station has now been com-
pleted.
To Next Page
Loading...
