Using the APP Recorder 6-6
To Set an Administrator Password
1. From the File menu, select Administrator.
2. From the File menu, click Change Administrator Password.
A Change Administrator Password box appears.
3. Enter the desired password and click OK.
The Change Administrator Password box reappears.
4. Re-type your new password and click OK.
The password is now set.
Note: If the Password box does not appear when you select an administrative feature, then
you have not set an administrative password.
Also, if a check mark does not appear next to the Administrator menu item, and there is
an administrative password, then the Change Administrator Password option will not
appear on the File menu.
6.5 Printing
There are several types of information you can print from the APP Recorder:
Message window contents
Recent Fault Summary Report
Recent Fault Summary Report with Graph
6.5.1 Selecting and Configuring the Printer
Before you print, select and configure the printer that you want to use.
To Select and Configure the Printer
1. From the File menu, select Printer Setup.
The standard Windows Print Setup dialog box appears.
2. From the Name list, select the printer that you want to use.
3. Complete the other fields in this dialog box and then click OK.
6.5.2 Printing the Contents of the Message Window
To Print the Contents of the Message Window
In the APP Recorder window, from the File menu, click Print Message Window.
The contents of the Message window are immediately sent to the printer you selected in the
procedure, Selecting and Configuring the Printer.
6.5.3 Printing the Recent Fault Summary
You can preview or print a fault summary report for the last recorded fault. If the APP Recorder Program is
stopped, and restarted, this function will not work until a new fault record is generated: it does not read
prior fault records.
To Next Page
Loading...