APP APP-601 - Table 11: Configuring Automatic Tasks-Options in the Print List

Using the APP Recorder 6-16
Table 11: Configuring Automatic Tasks—Options in the Print List
If a fault triggers the Recorder
Select this option
Also set the values of
these fields
What should it
upload?
When?
Nothing
Note: You can
still manually
activate printing.
n/a
No
n/a
A Fault Summary
File
Always
Yes– always (Print
FSum Only)
n/a
A Fault Summary
File, and associated
data
Always
Yes – always (Print
FSum and Data)
Data means these only
check boxes
A Fault Summary
File
Only when
certain
conditions occur
Yes – if logic true
(Print FSum Only)
Logic (OR=1, AND =&)
box
A Fault Summary
File, and associated
data
Only when
certain
conditions occur
Yes – if logic true
(Print FSum and
Data)
Logic (OR=1, AND =&)
box
Data means these only
check boxes
A Fault Summary
File (always)
and associated data
(sometimes)
Always print a
Fault Summary
Report
but
Print all analog
waveforms and
all event graphs
only when
certain
conditions occur
Yes – always
(FSum), if logic
true (Data)
Logic (OR=1, AND =&)
box
Data means these only
check boxes
3. Do you need to complete the Logic box?
This box indicates the condition(s) that must met in order for the Recorder to send the data to the
master station.
 If yes, then complete the Logic box. For more information, see Error! Reference source not
ound. Section 6-25.
 If no, then skip to the next step.
4. Do you want to configure the format of printed reports?
 If yes, continue with the procedure, Configuring the Format of Printed Reports.
 If no, from the menu bar, click Save.