50
AT2818/2816A/2816B/2817A/2817/810A User's Guide
Step 3. Use the cursor key to select [AUTO RECALL] field
Step 4. Use the soft keys to select.
Soft key Function
LAST FILE Last used file will be recalled at next startup.
FILE 0 File 0 will be recalled at next instrument startup.
7.1.2 Autosaveda tatolastfile[AUTOSAVE]
You can save the modified data into last used file when the instrument power key is
pressed.
To turn on/off the AUTO SAVE function
Step 1. Press the [Meas] or [Setup] key
Step 2. Press the [FILE] bottom soft key.
Step 3. Use the cursor key to select [AUTO SAVE] field
Step 4. Use the soft keys to select.
Soft key Function
ON Auto save function will be enabled.
OFF Turn off the auto save function.
7.1.3 Fileoperation
To choose a file to operate
Step 1. Press the [Meas] or [Setup] key
Step 2. Press the [FILE] bottom soft key.
Step 3. Use the cursor key to select a file (File name from 0 to 9)
Step 4. Use the soft keys to operate.
Soft key Function
SAVE Save user configuration data into current selected file.
RECALL Recall configuration data from current selected file.
ERASE This file will be erased. The user configuration data will be
reset to default at next startup.