Applent Instruments AT2818 - File:load; File:delete; Error Subsystem; Common Commands

86
AT2818/2816A/2816B/2817A/2817/810A User's Guide
Command Syntax
FILE:SAVE
Example
SEND> FILE:SAVE<NL>
The FILE:SAVE <n> command saves all user settings into specified file.
Command Syntax
FILE:SAVE <File No.>
Parameter
Where, <File No.> is:
NR1 (0 to 9)
Example
SEND> FILE:SAVE 0<NL>
11.17.3 FILE:LOAD
The FILE:LOAD command recalls all user settings from current used file.
Command Syntax
FILE:LOAD
Example
SEND> FILE:LOAD<NL>
The FILE:LOAD <n> command recalls all user settings from specified file.
Command Syntax
FILE:LOAD <File No.>
Parameter
Where, <File No.> is:
NR1 (0 to 9)
Example
SEND> FILE:LOAD 0<NL>
11.17.4 FILE:DELete
Command Syntax
FILE:DELete <File No.>
Parameter
Where, <File No.> is:
NR1 (0 to 9)
Example
SEND> FILE:DELete<NL>
11.18 ERRorSubsystem
The ERRor subsystem retrieves last error information.
Query Syntax
ERRor?
Query Response
Error string
Example
SEND> ERR?<NL>
RET> no error.<NL>
11.19 CommonCommands
11.19.1 *IDN?
The *IDN? query returns the instrument ID.
Query Syntax
IDN? Or *IDN?
Query Response
<manufacturer>,<model>,<serial no.>,<fireware>
11.19.2 *TRG
The *TRG command (trigger command) performs the same function as the Group