69Command Reference
(b) NR2 fix float: For example, 1.23,+1.23,-1.23
(c) NR3 floating point: For example, 1.23e3, 5.67e-3, 123k, 1.23M, 2.34G,
The available range for numeric data is 9.9E37. When numeric data is used as a
parameter, the suffix multiplier mnemonics and suffix units (The suffix multiplier must
be used with the suffix unit.) can be used for some commands as follows.
Table11‐1 MultiplierMnemonics
Definition Mnemonic
1E18 (EXA) EX
1E15 (PETA) PE
1E12 (TERA) T
1E9 (GIGA) G
1E6 (MEGA) MA
1E3 (KILO) K
1E-3 (MILLI) M
1E-6 (MICRO) U
1E-9 (NANO) N
1E-12 (PICO) P
1E-15 (PEMTO) F
1E-18 (ATTO) A
11.5 CommandReference
All commands in this reference are fully explained and listed in the following functional
command order.
DISPlay Subsystem
FUNCtion Subsystem
FREQuency Subsystem
VOLTage Subsystem
APERture Subsystem
FETCh Subsystem
COMParator Subsystem
LIST Subsystem
CORRection Subsystem
TRIGger Subsystem
BIAS Subsystem
FILE Subsystem
ERRor Subsystem
Common Command:
*TRG
*IDN?
*SAV
*RCL
The explanation of each subsystem command is patterned as follows.
1. Subsystem command name