Applent Instruments AT2818 - Sav; Rcl

87Command Reference
Execute Trigger command.
Command Syntax
*TRG
Query Response
<primary value>,<secondary value>,<comparator result>
Example
SEND> *TRG
RET> +5.566785e-11,+7.253470e-01,OUT
Note
This command can be used in BUS trigger mode.
*TRG = TRIG;:FETC?
11.19.3 *SAV
*SAV = FILE:SAVE
The *SAV command saves all user settings into current used file.
Command Syntax
*SAV
Example
SEND> *SAV<NL>
11.19.4 *RCL
*RCL = FILE:LOAD
The *RCL command recalls all user settings from current used file.
Command Syntax
*RCL
Example
SEND> *RCL<NL>