1-10
X6 - P/N 6525032M1
WARRANTY CLAIM
A correct installation, followed by a regular maintenance,
will help in preventing malfunctions or breakdowns. If you
should detect any assembly defects or malfunctions dur-
ing the warranty period, it will be necessary to immediately
inform the Argo Tractors Dealer stating the problem, the
tractor's model, the serial number and number of worked
hours.
Immediate communication of these information to your
Dealer within the warranty period will make it possible to
analyze the problem to find the correct resolution.
The Warranty will be null and void it such communication
is not within the warranty period.
It should be noted that normal maintenance services such
as tuning, brake/clutch adjustments, and the supply of
materials used to service the tractor (oil, filters, fuel and
antifreeze) are not covered by terms of the warranty.
SPARE PARTS WARNING
Only genuine spare parts should be used as inferior
quality parts may not only impair performance, but also
be dangerous for the operator's health and safety. The
manufacturer of the tractor will not take any responsibility
for any loss, damage or liability resulting from the fitment
of such parts, and, if fitted during the normal warranty
period will invalidate the manufacturer's warranty.
IF YOU MOVE
The Argo Tractors Dealer by whom you bought your trac-
tor is sole responsible for the protection given by your
warranty. We recommend that any repair of your machine
should be made by the Dealer. If you move outside of your
selling dealer's area of responsibility, or the tractor should
operate in a different area, you should enquire and notify
the relevant authorised Argo Tractors Dealer in your new
area about your machine. This will ensure any remaining
warranty and servicing can be supported. If you moved
from the area of your original Argo Tractors Dealer without
any arrangements with the new Dealer, the latter will give
you assistance for emergencies, but will charge normal
prices, unless:
a. You make it clear that the warranty has not expired, and
b. The Argo Tractors Dealer making the repair can make
the due arrangements with the original Dealer.
POST-WARRANTY SERVICE
During the warranty period it is advisable to let your Argo
Tractors Dealer perform every repair and servicing. In this
way the Dealer is able to keep under control operation and
performances of your new tractor.
Introduction - Warranty
In order to obtain the best performances from your tractor,
it is important to go on with regular checks and servic-
ing even after the warranty is expired. Turn to your Argo
Tractors Dealer for all main service operations. A trained
engineer will spot any problems between one service
and the next.
Our engineers are regularly trained and updated on the
product, servicing techniques and the use of modern
service tools and diagnostic equipment. They receive
regular Service Bulletins, have all Workshop Manuals and
other such technical information to ensure that the repair
or service is to the standard required.
SAFETY
The safety of the operator is one of the main concerns
in designing and developing a new tractor. Designers
build in as many safety features as possible. However,
every year many accidents occur which could have been
avoided by a few seconds thought and a more careful
approach to handling farm machinery and implements.
Therefore you are required to read through and imple-
ment the safety instructions detailed in the Safety Notes
section of this book.
CAU-
TION: In some of the illustrations used in this
Operator Instruction Book, panels or guards
may have been removed for clarity. Never op-
erate the tractor without these components
in position. If the removal of panels or guards
is necessary to make a repair, they MUST be
replaced before operation.
To Next Page
Loading...