Operation
5-7
5
P/N 6525032M1 - X6
PARKING THE TRACTOR [4.1.c]
STEP 1
Park the tractor and shift the forward/reverse shuttle lever
to the central position of NEUTRAL.
STEP 2
Disengage the PTO if in operation.
STEP 3
Move the throttle lever to the low idle position and let
the engine run for three to five minutes to decrease the
temperature of the engine before turning it off.
IMPORTANT: This step is very important if the engine has
been operating under heavy loads for a while. In this way,
the engine temperature will decrease gradually.
STEP 4
Engage the park brake. With the ignition key on position
1 (Key On), engage the Park Lock (if equipped).
STEP 5
Turn the key switch anti-clockwise to the OFF position
and remove the key.
IMPORTANT: NEVER turn the ignition key on the OFF
position while the tractor is moving. Serious damage to
the transmission could result.
STEP 6
Turn the master battery disconnector switch anticlockwise
to deactivate it.
WARNING: Whenever the tractor is left unattended,
the ignition key must be removed.
Folding wheel wedges
(if equipped).
Use the wheel wedge in front of or behind a rear wheel,
(depending on the driving direction of the tractor), when
parking the tractor on a slope.
IMPORTANT: To prevent accidents do not park the tractor
with equipment raised.
To Next Page
Loading...