Controls - Cab
3-33
3
P/N 6525032M1 - X6
Fig. 3-58
Setup with automatic air condi-
tioner - Fig. 3-58
1. Manual/automatic ventilation selector switch
2. Digital display (LCD)
3. Compressor ON/OFF switch
4. Defrost switch
5. Air re-cycling switch
6. Temperature control
The air flow within the cab changes automatically because
the air conditioning system adapts compressor operation,
fan speed and air circulation so as to keep the selected
temperature steady.
The inner temperature can change with increments of
0.5°C in the range 20-24°C and increments of 1°C beyond
this range.
Table of temperatures on LCD display in Celsius and
Fahrenheit degrees:
°C °F
LO LO
18 64
19 66
20 68
21 70
22 72
23 74
24 76
25 77
26 79
HI HI
The HI/LO messages and the tractor icon show the high-
est and lowest limits of re-cycling.
Fig. 3-59
Pre-setting of temperature in the cab
Fig. 3-59
Turn the control (6) to set the required temperature. The
pre-set value is displayed on LCD (2).
CAB TEMPERATURE CONTROLS [4.1.b]
To Next Page
Loading...