Maintenance
7-23
7
P/N 6525032M1 - X6
STEP 6A
Coolant level (expansion vessel)
WARNING: Always use the specific PPE for the opera-
tion concerned. Beware of burns caused by hot water
and engine parts. [4.1.n]
Check the coolant level when the coolant is cold and with
the engine stopped. DO NOT REMOVE THE RADIATOR
CAP.
The coolant level must be within the normal cold range
marks stamped on the reservoir (1). If the level is below
the minimum mark, fill the reservoir to the top mark with
correct coolant mixture (this will depend upon market
requirements).
Precautions against freezing temperatures
To prevent ice from forming in the radiator, add specific
products according to the instructions given by the anti-
freeze manufacturer.
Antifreeze also possesses antioxidant and rust-inhibiting
properties and is suitable for all seasons.
The following amounts are indicatively required:
Quick reference guide
in the following percentages:
Ambient temperature (°C) -8 -15 -25 -35
Ambient temperature (°F) -18 -5 -13 -31
Percentage of antifreeze % 20 30 40 50
WARNING: Hot coolant can spray out if the
coolant recovery reservoir cap or radiator
cap is removed while system is still hot. DO
NOT REMOVE THE RADIATOR CAP. To remove
the coolant recovery reservoir cap or radiator
cap, let system cool, turn cap to first notch,
then wait until pressure is released. Scalding
can result from fast removal of radiator cap.
To Next Page
Loading...