7-76
Maintenance
X6 - P/N 6525032M1
STEP 53A
Replacement of cab air intake filter
WARNING: Always use the specific PPE for the opera-
tion concerned.
WARNING: Maintenance operations must be carried
out when the engine is off. Make sure that the hand
brake is engaged and the key is not inserted in the
dashboard.
WARNING: Respiratory protection equipment
and protective clothing appropriate to the
environment that the filter has been in con-
tact with MUST be used during the cleaning
of the filter.
WARNING: Do not stand on the tractor to serv-
ice the filter, use the correct equipment for a
safe standing platform or injury can result.
STEP 1
Loosen both knobs (2) fixing the cover.
Open the filter cover and take the filtering element (1) out.
Clean the filter seat.
IMPORTANT: The old filter MUST be put into a sealed
container and disposed of in accordance with local regula-
tions. Be responsible for the environment.
STEP 2
Install the new filter (1).
Close the cover and fix it with the knobs (2).
NOTE:Replace the filter only with genuine spare parts.
WARNING: See the procedure to check and
clean the cab air intake filter under service
operations at 100 hours, the notes for the cor-
rect use of the cab filters, and the precautions
when using dangerous chemicals.
To Next Page
Loading...