Argo McCORMICK X6.430 STD/LS - Page 155

Operation
5-11
5
P/N 6525032M1 - X6
Speed tables
NOTE: The speeds below are detected at 2200 RPM rated speed.
NOTE: According to the laws in force in the Country where the tractor will be used, the maximum speed the tractor will
reach is limited according to engine RPM.
UNDERDRIVE
Speed (Kph)
ri = 750 mm ri = 775 mm ri = 800 mm
CREEpER
1 0,29 0,30 0,31
2 0,46 0,48 0,49
3 0,65 0,68 0,70
4 1,02 1,05 1,09
Slow
1 1,40 1,45 1,49
2 2,20 2,27 2,35
3 3,12 3,22 3,33
4 4,87 5,03 5,20
StaNDaRD
1 3,34 3,45 3,57
2 5,25 5,43 5,60
3 7,45 7,70 7,95
4 11,64 12,02 12,41
FaSt
1 8,24 8,52 8,79
2 12,96 13,39 13,82
3 18,38 18,99 19,61
4 28,70 29,66 30,62
DIRECt DRIVE
Speed (Kph)
ri = 750 mm ri = 775 mm ri = 800 mm
CREEpER
1 0,35 0,37 0,38
2 0,56 0,57 0,59
3 0,79 0,81 0,84
4 1,23 1,27 1,31
Slow
1 1,69 1,74 1,80
2 2,65 2,74 2,83
3 3,76 3,89 4,01
4 5,88 6,07 6,27
StaNDaRD
1 4,03 4,17 4,30
2 6,34 6,55 6,76
3 8,99 9,29 9,59
4 14,04 14,51 14,98
FaSt
1 9,95 10,28 10,61
2 15,64 16,16 16,68
3 22,18 22,92 23,65
4 34,63 35,79 36,94