5-18
Operation
X6 - P/N 6525032M1
Engagement of Powershift ranges
under load
The gearbox provides 3 HML ranges (High-Medium-Low)
that can be engaged under load in forward gears.
For each engaged gear, 3 speeds are available: HML
(High-Medium-Low)
To select, turn the Powershift switch on the gearshift
lever: changes from one range to the next are automatic
and under load.
Turn the switch up to shift the range up: mark .
Turn the switch down to shift the range down: mark .
The switch always returns to the centre position.
The Powershift switch can be set on any position with the
tractor moving, without depressing the clutch pedal or
the clutch pedal or the Declutch disengagement button.
To ensure that the ranges are shifted in the correct se-
quence, move the switch one range at a time in the 1,
2, 3 order.
IMPORTANT: To prevent excessive deceleration of the
tractor ALWAYS downshift one range at a time in sequence
3, 2, 1.
The instrument cluster on the central display shows which
gear is selected. For more information on the instrument
cluster, refer to section 4 in this manual.
Reaction to control settings
The monitoring system automatically analyses the condi-
tions in which the tractor is used and chooses reaction
times most suitable to any condition.
To Next Page
Loading...