EasyManua.ls Logo

Argo McCORMICK X6.430 STD/LS - Page 199

Argo McCORMICK X6.430 STD/LS
386 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operation
5-55
5
P/N 6525032M1 - X6
Safety chain
(if equipped - for NAO markets)
WARNING: Always use the specific PPE for the opera-
tion concerned.
When towing an implement (1) on public roads, as sup-
plementary coupling between tow bar (3) and implement
a safety chain (2) must be used whose capacity is higher
than the gross weight of the towed implement.
To know the implement's weight and any technical specifi-
cations of the attachments, refer to the operator's manual
provided with the implement itself.
Make sure the chain is correctly mounted after connect-
ing it. Drive the tractor for a short while, turning to the
right and to the left to check that the chain is neither too
short or too long.
Adjust the chain length as required.
Before driving on public roads, always make sure that all
laws in force in the country are complied with. If neces-
sary, refer to your Argo Tractors Dealer.

Table of Contents

Related product manuals