1-2
X6 - P/N 6525032M1
This manual was compiled in compliance with the the ISO 3600 standards and the here contained instructions
comply the requirements of the Machinery Directive 2006/42/EC and Directive 2010/52/EC in force in the European
Union. For tractors sold or used outside the European Union, local laws will prevail.
This Operator's Manual is valid in all countries in the world and for all models. The photos, warnings and instruc-
tions it contains concern both standard and optional equipment. Therefore you might find details on parts that
are not installed on your own tractor, depending on national laws and ordered optionals.
The tractor is provided of safety features complying to national and international laws. For your own safety, such
features should be correctly used at any time and checked for operation. Ask your dealer if you have any doubts
about their operation or their use.
* Complying to EN 15695-1:2009
Main protections on the tractors discussed in this manual. [4.1.o][4.1.p][4.1.q][4.5.b][4.5.3]
CAB
ROPS (protection against overturning) YES
FOPS (protection against objects falling from above) YES
OPS (protection against penetration of objects from sides) NO
Protection against hazardous chemicals CAT. 2*
WARNING: Any warranties for modified operation
units (safety frame, electric and hydraulic systems
a.s.o) expire if cabs are mounted that are not ap-
proved by the tractor's maker. Moreover, noise levels
and compliance with the approvals cannot be verified
in this case.
CALIFORNIA
Statement 65 Warning
Diesel engine exhaust and some of its constituents
are known to the State of California to cause cancer,
birth defects, and other reproductive harm.
Units of measurement
All units of measurement used in this manual are metric
unless otherwise stated.
Use the following table to convert from metric to impe-
rial units.
mm x 0.03937 = inches
kg x 2.2 = pounds
bar x 14.5038 = PSI
Litres x 0.22 = British gallons
Litres x 0.264 = US gallons
N (Newton) x 0.225 = pound/foot
Nm x 0.738 = pound/foot
Nm x 8.85 = pound/inch
°C x 1.8 (=32) = °F
km/h x 0.62 = MPH
To Next Page
Loading...