TD 93021US
17 July 2017 / Ver. PF3 173
Installation Guide
teleCARE IP
Document History
Version Date Description
A 21 August 2014 • First US release
B 12 February 2015 • Product images Update
• Disabling the LEDs if only the relay contact is required, see
“Disabling the LEDs” on page 39
• Connection of an ESPA (or a TAP) paging system added, see
“System Manager (NISM2)” on page 51
• Content referring to NIRC, NICL and NILD has been removed.
• NISM2 Electrical Connections updated: on page 52
through 53
• Connecting a Paging System added, see “Connecting a Paging
System” on page 54
C 2015-12-08 • NILF Tamper alarm output functions only with external power
connected. See “Tamper Alarm” on page 156.
• Important statement added to remove the NIRX from the NILF
before mounting the NILF onto a wall. See “Mounting an NILF
with NIRX” on page 149.
D 07 June 2016 • Added chapter “External Inputs”. See “External Inputs” on
page 114.
E 23 January 2017 • Assembling and Attaching the Pull Cord, image has been
updated. See “Assembling and Attaching the Pull Cord”
(details on page 79)
• Ethernet LAN and room bus cabling updated to reflect NIRC3 (4
Room Buses) See “Ethernet LAN and room bus cabling” on
page 7.
F • Regulatory Compliance (EU/EFTA) updated.
• Wireless chapter extended with wireless infrastructure. See
“Wireless Infrastructure” on page 138.
Wireless modules added:
NUREP - See “NUREP Wireless Repeater” on page 140.
Outdoor Box, using a suitable weatherproof enclosure that meets
local electrical code - See “Outdoor Box” on page 143.
Wireless Gateway (NIRC3 + NUREP) - See “Wireless Gateway”
on page 144.
NUWBM3 - See “NUWBM3 Wireless Active Bedside
Module” on page 147.
NUUTX - See “NUUTX Universal Transceiver” on page 158.
NUWIR - See “NUWIR Wireless PIR Module” on page 161.
To Previous Page
Loading...
Need help?
General