Atlas Copco STwrench User Manual

Introduction STwrench User Guide
14 (326) 9836 4134 01 Edition 2.9
Chapter 10 STwrench Settings
This chapter guides the operator in all the settings
of the STwrench, in order to customize the
product to the customer’s needs.
Chapter 11 Offline Programming
This chapter explains the function to create the
tightening program and STwrench configuration
working with ToolsTalk BLM offline (not
connected to a STwrench).
Chapter 12 Result Viewer
This chapter describes how the management
program retrieves the STwrench result.
Chapter 13 Traces Viewer
This chapter describes how the management
program retrieves the STwrench traces.
Chapter 14 Real Time Traces
This chapter explains the use of the Real Time
Traces function.
Chapter 15 Working with Power Focus
This chapter explains the use of the wrench with
Power Focus.
Chapter 16 Working with ToolsNet
This chapter explains the use of the wrench with
ToolsNet.
Chapter 17 Working with Torque Supervisor
This chapter explains the use of the wrench with
Torque Supervisor.
Chapter 18 Working with the QATnode
This chapter explains the use of the wrench with
the various QATnodes, for printing the tightening
results, interfacing the STwrench with a remote
device using the I/O module, and connecting to
ToolsNet.
Chapter 19 Working with the API
This chapter explains the use of the wrench with
the API interface.
Chapter 20
and 21
Maintenance and Troubleshooting
Guide
These chapters describe the required maintenance
for the STwrench, and how to troubleshoot to
solve the most common problems.
Appendix A
Torque / Angle Coefficient
Calculation for Wrench Extension
This appendix shows the operator how to
calculate the correction coefficients when an

Atlas Copco STwrench Specifications

General

Brand	Atlas Copco
Model	STwrench
Category	Tools
Language	English