System Overview STwrench User Guide
54 (326) 9836 4134 01 Edition 2.9
2.4.9 QATnode
These accessories provide additional functions to the STwrench. The QATnode is available in three
different versions:
• QATnode P: QATnode for printing the tightening result on a STAR printer.
• QATnode I/O: QATnode for printing the tightening result on a STAR printer, and I/O module for
communication with a remote device.
• QATnode T: QATnode for printing the tightening result on a STAR printer, I/O module for
communication with a remote device, and with ToolsNet connection.
With the QATnode, a CD containing the configuring software is provided.
See the Working with the QATnode chapter for more information of the QATnode settings and operations.
To Next Page
Loading...
