Working with ToolsNet STwrench User Guide
240 (326) 9836 4134 01 Edition 2.9
On ToolsNet 4000 the results are presented like this:
16.2 Tightening Data Transferred to ToolsNet
For each tightening operation performed by the STwrench, the following results are sent to ToolsNet:
• Tightening program name
• Tightening program number
• Torque Limit Low
• Torque Limit High
• Angle Limit Low
• Angle Limit High
• Time and Date
• Overall result: OK, Low or High
• Final Torque
• Final Torque Status
To Next Page
Loading...
