STwrench User Guide System overview
9836 4134 01 Edition 2.9 25 (326)
2.3 STwrench Typical Applications Scenario
This chapter provides a quick overview of the main applications of the STwrench.
2.3.1 Stand-alone wrench printing the results
The STwrench can work as a stand-alone instrument for either production or quality control, programmed
by its management software (ToolsTalk BLM), which can retrieve tightening results and traces, to be
printed and/or exported into a Microsoft Excel file.
See the Working with ToolsTalk BLM chapter for more information.
By using the QATnode P (but also the other QATnode models provide this function), it is possible to print
the results of tightening operations on a STAR printer. The connection can be made via the IRDA port, or
IRC-W module:
To Next Page
Loading...
