Working with ToolsTalk BLM STwrench User Guide
72 (326) 9836 4134 01 Edition 2.9
5.1 Software Installation and Registration
NOTE: Installation requires PC administrator rights.
NOTE: Do not install the software from a shared folder/drive. Install the software from the
supplied CD; if the CD content is copied into a PC folder, it must be a local PC folder.
If possible, install the software with a STwrench switched on and connect to the PC via a USB cable.
To install the software, simply double-click on the setup file on the installation CD and follow the
instructions.
NOTE: For Window 7 operating system, right-click on the setup file and select the Run as
Administrator command:
Click on Continue Anyway if the following Windows message is shown:
To Next Page
Loading...
