Atlas Copco STwrench - 18.5 ToolsNet Connection via QATnode

Working with the QATnode STwrench User Guide
286 (326) 9836 4134 01 Edition 2.9
18.5 ToolsNet Connection via QATnode
This function is provided only by the QATnode T.
The ToolsNet settings must be specified in a different menu to the one used when the STwrench is
connected to ToolsNet directly via the IRC-W radio and not passing through the QATnode.
In ToolsTalk BLM, select Accessories → QATnode
Access Point
IRC-W
Network
Network