Working with the API STwrench User Guide
292 (326) 9836 4134 01 Edition 2.9
• Backing up setups on a central server
19.1 API Connection with IRC-W
The STwrench and API can be connected via IRC-W. The IRC-W module must be installed in the
STwrench (see the chapter QAT IRC-W radio module for more information).
The IRC-W module must be properly configured; the configuration can be done directly from the API
(connecting the STwrench via a USB cable). However, the ToolsTalk BLM also allows the module
settings in a dedicated menu. Access the Controller → IRC-W API settings menu:
To configure the module, ensure that connection is disabled:
connection
To Next Page
Loading...
