STwrench User Guide Working with the API
9836 4134 01 Edition 2.9 293 (326)
Then select the IRC-W API settings menu:
• SSID: Enter the SSID name of your own wireless network.
• IRC-W mode: Select Access Point.
• Host name: Specify a name of the wrench; if you have more than one wrench the names must be
different.
• IP Address: Specify the IP address of the PC where API is installed (not used if TCP listener is
enabled).
• Port: Specify the port number of the PC where the API is installed (not used if TCP listener is
enabled).
To Next Page
Loading...
