STwrench User Guide Working with Torque Supervisor
9836 4134 01 Edition 2.9 245 (326)
17.1 Connecting the STwrench to Torque Supervisor
The STwrench can be connected to Torque Supervisor via USB or IRC-W Dual Band radio module.
For USB connection, the STwrench does not need any special settings.
For IRC-W Dual Band radio module connection, the radio module must be properly configured; Connect
the STwrench via USB to ToolsTalk BLM. Access the Controller → IRC-W API settings menu:
To configure the module, ensure that connection is disabled:
connection
To Next Page
Loading...
Need help?
General
