STwrench User Guide Identifier
9836 4134 01 Edition 2.9 159 (326)
After having scanned the Type 1 barcode, the wrench automatically starts the associated
Pset/Multistage/Job.
NOTE: Pressing the CL button on the wrench keyboard during the identifier reading sequence
will result in the wrench exiting to the main menu and canceling the readings already taken;
pressing the OK button on the wrench keyboard will cause the wrench to exit to the main menu
without canceling the readings already taken, allowing readings to continue.
To Next Page
Loading...
Need help?
General
