STwrench User Guide STwrench Settings
9836 4134 01 Edition 2.9 171 (326)
2. Select submenu IRC-B. Click on Start pairing procedure and then on Store:
3. Start the pairing procedure on Power Focus.
4. Wait until pairing is complete (ensure that pairing is completed with no errors).
5. Click on Store.
6. Enable the Enable connection with IRC flag and click on Store.
7. The wrench starts working in the Power Focus mode (see the Working with Power Focus
chapter for details).
NOTE: By deactivating the Enable connection IRC flag, the wrench reverts to
the normal working mode.
1. Disable
pairing
2. Store
To Next Page
Loading...
Need help?
General
