STwrench User Guide Working with Power Focus
9836 4134 01 Edition 2.9 223 (326)
Once you have completed the configuration, click on STORE to save.
In the IRC menu, enable the Enable connection with IRC flag:
NOTE: When the STwrench is connected to the ToolsTalk BLM via the USB cable, the
connection to Power Focus is not active. After completing wrench settings and/or programming,
disconnect the USB cable to activate the connection to Power Focus.
Data rate
Select the data rate. A slower value may help when the communication is not
high-performance.
Power mode
The Sleep mode is recommended for lower power consumption.
Roaming threshold
Select the threshold under which the STwrench will search for a new access
point to connect through.
To Next Page
Loading...
