Atlas Copco STwrench User Manual

Working with the QATnode STwrench User Guide
260 (326) 9836 4134 01 Edition 2.9
Select the COM port of your PC and click on Open:
Click on Read to display the QATnode settings.
Change the default IP Address to a proper address suitable for your own network.
The Port must be the same port specified in the QATnode settings in ToolsTalk BLM.
Click on Store to save the settings.
The Restore to Default command resets the factory values. After having executed this command, click on
Store, then restart the QATnode.
NOTE: These QATnode settings are stored inside the QATnode and not in the .ttb file saved by
ToolsTalk BLM.
Select and open the COM
port of your PC
Click on Read to display
QATnode parameter.

Atlas Copco STwrench Specifications

General

Brand	Atlas Copco
Model	STwrench
Category	Tools
Language	English