AudioCodes MediaPack MP-11 Series User Manual

Version 7.2 1017 Mediant 1000B Gateway & E-SBC
User's Manual 62. Configuration Parameters Reference
Parameter Description
Manipulation on page 368.
Message Policies Table
Message Policies
configure voip > message
message-policy
[MessagePolicy]
Defines SIP message policy rules for blocking (blacklist) unwanted
incoming SIP messages or allowing (whitelist) receipt of desired
messages.
The format of the ini file table parameter is as follows:
[MessagePolicy]
FORMAT MessagePolicy_Index = MessagePolicy_Name,
MessagePolicy_MaxMessageLength,
MessagePolicy_MaxHeaderLength, MessagePolicy_MaxBodyLength,
MessagePolicy_MaxNumHeaders, MessagePolicy_MaxNumBodies,
MessagePolicy_SendRejection, MessagePolicy_MethodList,
MessagePolicy_MethodListType, MessagePolicy_BodyList,
MessagePolicy_BodyListType,
MessagePolicy_UseMaliciousSignatureDB;
[/MessagePolicy]
For a detailed description of the table, see Configuring SIP Message
Policy Rules.
configure voip > sip-
definition settings >
message-policy-reject-
response-type
[MessagePolicyRejectRespo
nseType]
Defines the SIP response code that the device sends when it rejects
an incoming SIP message due to a matched Message Policy in the
Message Policies table, whose ‘Send Reject’
(MessagePolicy_SendRejection) parameter is configured to Policy
Reject [0].
The default is 400 "Bad Request".
To configure Message Policies, see Configuring SIP Message Policy
Rules.
62.8 Coders and Profile Parameters
The profile parameters are described in the table below.
Table 62-33: Profile Parameters
Parameter Description
Coder Groups Table
Coder Groups
configure voip > coders-
and-profiles audio-coders-
groups
[AudioCodersGroups]
[AudioCoders]
Defines the device's coders. Each group can consist of up to 10 coders.
The first Coder Group is the default coder list and the default Coder
Group.
The format of the ini file table parameter is as follows:
[ AudioCodersGroups ]
FORMAT AudioCodersGroups_Index = AudioCodersGroups_Name;
[ \AudioCodersGroups ]
[ AudioCoders ]
FORMAT AudioCoders_Index = AudioCoders_AudioCodersGroupId,
AudioCoders_AudioCodersIndex, AudioCoders_Name,
AudioCoders_pTime, AudioCoders_rate, AudioCoders_PayloadType,
AudioCoders_Sce, AudioCoders_CoderSpecific;
[ \AudioCoders ]

AudioCodes MediaPack MP-11 Series Specifications

General

Brand	AudioCodes
Model	MediaPack MP-11 Series
Category	Gateway
Language	English