User's Manual 850 Document #: LTRT-27045
Mediant 1000B Gateway & E-SBC
CDR Field Range Description
unavailable (not licensed or disabled),
this R-factor VoIP metric is not provided.
Instead, the device sends the CDR field
with the value 127, meaning that
information is unavailable.
LocalMosCQ
10 to 46 (127 if information is
unavailable)
Local MOS for conversation
RemoteMosCQ
10 to 46 (127 if information is
unavailable)
Remote MOS for conversation
TxRTPIPDiffServ
0 to 63 Media IP DiffServ
LatchedRtpIp
Remote IP address of the incoming RTP
stream that the device "latched" on to as
a result of the RTP latching mechanism
for NAT traversal.
LatchedRtpPort
0 to 0xFFFF Remote RTP port of the incoming RTP
stream that the device "latched" on to as
a result of the RTP latching mechanism
for NAT traversal.
LatchedT38Ip
Latching of a new T.38 stream - new IP
address
LatchedT38Port
0 to 0xFFFF Latching of a new T.38 stream - new
port
54.2.1.3 CDR Fields for SBC Local Storage
The CDR fields for SBC calls that are stored locally (history) on the device are listed in the
table below. For storing CDRs locally, see ''Storing CDRs on the Device'' on page 869.
Table 54-4: Default CDR Fields for Locally Stored (History) CDRs
CDR Field Title
Report Type SBCReportType
Endpoint Type EPTyp
Call Id SIPCallId
Session ID SessionId
Leg ID LegId
Call Orig Orig
Source IP SourceIp
Source Port SourcePort
Destination IP DestIp
Destination Port DestPort
Transport Type TransportType
Source URI SrcURI
To Next Page
Loading...
Need help?
General
