EasyManuals Logo
Home>AudioCodes>Gateway>MediaPack MP-11 Series

AudioCodes MediaPack MP-11 Series User Manual

AudioCodes MediaPack MP-11 Series
1195 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #891 background imageLoading...
Page #891 background image
Version 7.2 891 Mediant 1000B Gateway & E-SBC
User's Manual 55. Syslog and Debug Recording
Numerical Value Facility Level
23
local use 7 (local7)
Syslog messages begin with a less-than ("<") character, followed by a number, which is
followed by a greater-than (">") character. This is optionally followed by a single ASCII
space. The number is known as the Priority and represents both the Facility level and the
Severity level. A Syslog message with Facility level 16 is shown below:
Facility: LOCAL0 - reserved for local use (16)
55.2.1.3 Syslog Fields for Answering Machine Detection (AMD)
The Syslog message can include information relating to the Answering Machine Detection
(AMD) feature. AMD is used to detect whether a human (including a fax machine), an
answering machine, silence, or answering machine beeps have answered the call on the
remote side.
AMDSignal the field can acquire one of the following values:
voice (V)
answer machine (A)
silence (S)
unknown (U)
AMDDecisionProbability probability (in %) success that correctly detects answering
type
Below is an example of such a Syslog message with AMD information:
CallMachine:EVENT_DETECTED_EV - AMDSignal = <type V/A/S/U>,
AMDDecisionProbability = <percentage> %
If there is no AMD detection, the AMDSignal field is shown empty (i.e. AMDSignal = ).
For more information on the AMD feature, see ''Answering Machine Detection (AMD)'' on
page 200.
55.2.1.4 SNMP Alarms in Syslog Messages
SNMP alerts are sent to the Syslog server using the following formats:
Raised Alarms: RAISE-ALARM: <Alarm Name>; Textual Description: <Textual
Description>; Severity <Alarm Severity>; Source <Alarm Source>; Unique ID: <Alarm
Unique ID >.
If additional information exists in the alarm, then these are also added: Additional
Info1:/ Additional Info2:/ Additional Info3
The Messages’ Severity is as follows:
Table 55-6: Syslog Message Severity
ITU Perceived Severity
(SNMP Alarm’s Severity)
AudioCodes' Syslog Severity
Critical
RecoverableMsg
Major
RecoverableMsg
Minor
RecoverableMsg
Warning
Notice

Table of Contents

Other manuals for AudioCodes MediaPack MP-11 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AudioCodes MediaPack MP-11 Series and is the answer not in the manual?

AudioCodes MediaPack MP-11 Series Specifications

General IconGeneral
BrandAudioCodes
ModelMediaPack MP-11 Series
CategoryGateway
LanguageEnglish

Related product manuals