Version 7.2 217 Mediant 1000B Gateway & E-SBC
User's Manual 15. Services
Table 15-3: DHCP Vendor Class Table Parameter Descriptions
Parameter Description
Index
dhcp vendor-class <index>
[DhcpVendorClass_Index]
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
DHCP Server Index
dhcp-server-number
[DhcpVendorClass_DhcpServerIndex]
Associates the VCI table entry with a DHCP server that you
configured in ''Configuring the DHCP Server'' on page 211.
Note: Currently, only one DHCP server (Index 0) can be
configured and therefore, the parameter is always set at 0.
Vendor Class Identifier
vendor-class
[DhcpVendorClass_VendorClassId]
Defines the value of the VCI DHCP Option 60.
The valid value is a string of up to 80 characters. By default,
no value is defined.
15.1.3 Configuring Additional DHCP Options
The DHCP Option table lets you configure up to 10 additional DHCP Options that the
DHCP server can use to service the DHCP client. These DHCP Options are included in the
DHCPOffer response sent by the DHCP server.
The following procedure describes how to configure DHCP Options through the Web
interface. You can also configure it through ini file (DhcpOption) or CLI (configure network
> dhcp-server option).
Note: The additional DHCP Options configured in the DHCP Option table override the
default ones, which are configured in the DHCP Servers table. In other words, if you
configure Option 67 in the DHCP Option table, the device uses the value configured
in the DHCP Option table instead of the value configured in the DHCP Servers table.
 To configure DHCP Options:
1. Open the DHCP Servers table (see ''Configuring the DHCP Server'' on page 211).
2. Select the row of the desired DHCP server for which you want to configure additional
DHCP Options, and then click the DHCP Option link located below the table; the
DHCP Option table opens.
To Next Page
Loading...
Need help?
General
