AudioCodes MediaPack MP-11 Series User Manual

Version 7.2 1181 Mediant 1000B Gateway & E-SBC
User's Manual 62. Configuration Parameters Reference
Parameter Description
LDAP Numeric Attribute
ldap-numeric-attr
[LDAPNumericAttributes]
Defines up to five LDAP Attributes (separated by commas)
for which the device employs LDAP query searches in the
AD for numbers that may have characters between the digits.
For more information, see ''Enabling LDAP Searches for
Numbers with Characters'' on page 250.
MS LDAP OCS Number attribute
name
configure voip > sip-definition settings
> ldap-ocs-nm-attr
[MSLDAPOCSNumAttributeName]
Defines the name of the attribute that represents the user's
Skype for Business number in the Microsoft AD database.
The valid value is a string of up to 49 characters. The default
is "msRTCSIP-Line".
MS LDAP PBX Number attribute
name
configure voip > sip-definition settings
> ldap-pbx-nm-attr
[MSLDAPPBXNumAttributeName]
Defines the name of the attribute that represents the user
PBX number in the Microsoft AD database.
The valid value is a string of up to 49 characters. The default
is "telephoneNumber".
MS LDAP MOBILE Number attribute
name
configure voip > sip-definition settings
> ldap-mobile-nm-attr
[MSLDAPMobileNumAttributeName]
Defines the name of the attribute that represents the user
Mobile number in the Microsoft AD database.
The valid value is a string of up to 49 characters. The default
is "mobile".
configure voip > sip-definition settings
> ldap-private-nm-attr
[MSLDAPPrivateNumAttributeName]
Defines the name of the attribute that represents the user's
private number in the AD. If this value equals the value of the
MSLDAPPrimaryKey or MSLDAPSecondaryKey parameter,
then the device queries the AD for the destination number in
this private attribute name; otherwise, the parameter is not
used as a search key.
The default is "msRTCSIP-PrivateLine".
MS LDAP DISPLAY Name Attribute
Name
configure voip > sip-definition settings
> ldap-display-nm-attr
[MSLDAPDisplayNameAttributeName]
Defines the attribute name that represents the Calling Name
in the AD for LDAP queries based on calling number.
The valid value is a string of up to 49 characters. The default
is "displayName".
configure voip > sip-definition settings
> ldap-primary-key
[MSLDAPPrimaryKey]
Defines the name of the attribute used as a query search key
for the destination number in the AD. This is used instead of
the "PBX" attribute name (configured by the
MSLDAPPBXNumAttributeName parameter).
The default is not configured.
configure voip > sip-definition settings
> ldap-secondary-key
[MSLDAPSecondaryKey]
Defines the name of the attribute used as the second query
search key for the destination number in the AD, if the
primary search key or PBX search is not found.
LDAP Cache Service
configure system > ldap settings >
ldap-cache-enable
[LDAPCacheEnable]
Enables the LDAP cache service.
 [0] Disable (default)
 [1] Enable
Note:
 For the parameter to take effect, a device reset is
required.

AudioCodes MediaPack MP-11 Series Specifications

General

Brand	AudioCodes
Model	MediaPack MP-11 Series
Category	Gateway
Language	English