EasyManuals Logo
Home>AudioCodes>Gateway>MediaPack MP-11 Series

AudioCodes MediaPack MP-11 Series User Manual

AudioCodes MediaPack MP-11 Series
1195 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #758 background imageLoading...
Page #758 background image
User's Manual 758 Document #: LTRT-27045
Mediant 1000B Gateway & E-SBC
Note: To configure the User Info table, make sure that you have enabled the feature,
as described in Enabling the User Info Table on page 754.
43.1.8.2.3 Configuring GW User Info Table in Loadable Text File
The GW User Info table can be configured as a User Info file using a text-based file (*.txt).
This file can be created using any text-based program such as Notepad. You can load the
User Info file using any of the following methods:
Web interface - see ''Loading Auxiliary Files'' on page 737
ini file, using the UserInfoFileName parameter - see ''Auxiliary and Configuration File
Name Parameters'' on page
936
Automatic Update mechanism, using the UserInfoFileURL parameter - see Automatic
Update Mechanism
To add mapping rules to the User Info file, use the following syntax:
[ GW ]
FORMAT
PBXExtensionNum,GlobalPhoneNum,DisplayName,UserName,Password
Where:
[ GW ] indicates that this part of the file is the GW User Info table
PBXExtensionNum is the PBX extension number (up to 10 characters)
GlobalPhoneNum is the "global" phone number (up to 20 characters) for the IP side
DisplayName is the Caller ID (string of up to 30 characters) of the PBX extension
UserName is the username (string of up to 40 characters) for registering the user
when authentication is necessary
Password is the password (string of up to 20 characters) for registering the user when
authentication is necessary
Each line in the file represents a mapping rule of a single PBX extension user.
Note:
Make sure that there are no spaces between the values.
Make sure that the last line in the User Info file ends with a carriage return (i.e., by
pressing the <Enter> key).
To modify the GW User Info table using a User Info file, you need to load to the
device a new User Info file containing your modifications.
Below is an example of a configured User Info file:
[ GW ]
FORMAT
PBXExtensionNum,GlobalPhoneNum,DisplayName,UserName,Password
401,638001,Mike,miked,1234
402,638002,Lee,leem,4321
403,638003,Sue,suer,8790
404,638004,John,johnd,7694
405,638005,Pam,pame,3928
406,638006,Steve,steveg,1119
407,638007,Fred,frede,8142
408,638008,Maggie,maggiea,9807

Table of Contents

Other manuals for AudioCodes MediaPack MP-11 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AudioCodes MediaPack MP-11 Series and is the answer not in the manual?

AudioCodes MediaPack MP-11 Series Specifications

General IconGeneral
BrandAudioCodes
ModelMediaPack MP-11 Series
CategoryGateway
LanguageEnglish

Related product manuals