AudioCodes MediaPack MP-11 Series User Manual

User's Manual 844 Document #: LTRT-27045
Mediant 1000B Gateway & E-SBC
CDR Field Description CDR Report Type
(SBCReportType)
Format
SessionId
Unique Session ID All String (up to
10
characters)
LegId
Unique ID number of the call leg within a
specific call session.
A basic call consists of two legs (incoming
leg and outgoing leg) and thus, two leg
IDs are generated for the session, one for
each leg.
For each new call, the device assigns leg
ID "1" to the first leg. The device then
increments the leg ID for subsequent legs
according to the leg sequence in the call
session. For example, the device
generates leg ID "1" for the incoming leg
and leg ID "2" for the outgoing leg. If the
call is transferred, the device generates
leg ID "3" for the leg belonging to the call
transfer target. Another example is a call
forking session where the leg ID
sequence may be as follows: incoming leg
is "1", outgoing leg to user's office phone
is "2" and outgoing leg to the user's
mobile phone is "3". If the call is then
transferred, the leg ID for the transfer leg
is "4".
"CALL_START",
"CALL_CONNECT"
and "CALL_END"
String
(decimal)
Orig
Call originator:
 "LCL": local
 "RMT": remote
All String
SourceIp
Source IP address All String (up to
20
characters)
SourcePort
Source UDP port All String (up to
10
characters)
DestIp
Destination IP address All String (up to
20
characters)
DestPort
Destination UDP port All String (up to
10
characters)
TransportType
Transport type:
 "UDP"
 "TCP"
 "TLS"
All String
SrcURI
Source URI All String (up to
41
characters)

AudioCodes MediaPack MP-11 Series Specifications

General

Brand	AudioCodes
Model	MediaPack MP-11 Series
Category	Gateway
Language	English