Version 7.2 945 Mediant 1000B Gateway & E-SBC
User's Manual 62. Configuration Parameters Reference
Table 62-13: QoS Parameters
Parameter Description
Layer-2 Class Of Service (CoS) Parameters (VLAN Tag Priority Field)
DiffServ Table
configure network > qos vlan-mapping
[DiffServToVlanPriority]
The table configures DiffServ-to-VLAN Priority mapping. For
each packet sent to the LAN, the VLAN Priority of the packet
is set according to the DiffServ value in the IP header of the
packet.
The format of this ini file is as follows:
[ DiffServToVlanPriority ]
FORMAT DiffServToVlanPriority_Index =
DiffServToVlanPriority_DiffServ,
DiffServToVlanPriority_VlanPriority;
[ \DiffServToVlanPriority ]
For example:
DiffServToVlanPriority 0 = 46, 6;
DiffServToVlanPriority 1 = 40, 6;
DiffServToVlanPriority 2 = 26, 4;
DiffServToVlanPriority 3 = 10, 2;
For a description of the table, see Configuring Quality of
Service on page 152.
Note: For the parameter to take effect, a device reset is
required.
Layer-3 Class of Service (TOS/DiffServ) Parameters
CLI path: configure network > qos application-mapping
Media Premium QoS
media-qos
[PremiumServiceClassMediaDiffServ]
Global parameter defining the DiffServ value for Premium
Media CoS content.
You can also configure this functionality per specific calls,
using IP Profiles (IpProfile_IPDiffServ) or Tel Profiles
(TelProfile_IPDiffServ). For a detailed description of the
parameter and To configure the functionality, see
''Configuring IP Profiles'' on page 393 or Configuring Tel
Profiles on page 428.
Note: If the functionality is configured for a specific profile,
the settings of this global parameter is ignored for calls
associated with the profile.
Control Premium QoS
control-qos
[PremiumServiceClassControlDiffServ]
Global parameter defining the DiffServ value for Premium
Control CoS content (Call Control applications).
You can also configure the functionality per specific calls,
using IP Profiles (IpProfile_SigIPDiffServ) or Tel Profiles
(TelProfile_SigIPDiffServ). For a detailed description of the
parameter and To configure the functionality in the IP
Profiles table, see ''Configuring IP Profiles'' on page 393 or
Configuring Tel Profiles on page 428.
Note: If the functionality is configured for a specific profile,
the settings of this global parameter is ignored for calls
associated with the profile.
Gold QoS
gold-qos
[GoldServiceClassDiffServ]
Defines the DiffServ value for the Gold CoS content
(Streaming applications).
The valid range is 0 to 63. The default is 26.