AUMA Aumatic AC 01.1 - 3.5 Password Change

3.5 Password change
The following default password is set in the factory: 0000.
Æ
Via the menu to parameter:
MAIN MENU (M0)
SETTINGS (M1)
CHANGE PASSWORD (M1D)
ò
Step by step:
1. Setting the selector switch to position 0 (OFF).
2.
Press
C and hold it down for approx 3 seconds.
Display indicates:
3. Press
q.
Display indicates:
4. Press
8
.
Display indicates:
5. Select
CHANGE PASSWORD (M1D) using q.
Display indicates:
6. Press
8
.
Display indicates:
7. Enter password (see page 11).
13
Actuator controls
Manual AUMATIC AC 01.1/ACExC 01.1 Profibus DP
MAIN MENU M0
LANGUAGE/CONTRAST
SETTINGS
OPERATIONAL DATA
MAIN MENU M1
LANGUAGE/CONTRAST


SETTINGS
OPERATIONAL DATA
0
I
I
SETTINGS M10
SET LIMIT SWITCHES
SEATING MODE
TORQUE
SETTINGS M1D
PROFIBUS DP 1
INTERMED. POSITION
CHANGE PASSWORD
CHANGE PASSWORD M1D0
PASSWORD
0000
¿:EDIT C:ESC