4.4.2 Configuration of the signals: view/edit
Æ
Via the menu to parameter:
MAIN MENU (M0)
SETTINGS (M1)
LOCAL CONTROLS (M13)
LED 1 (LEFT HAND) (M1312)
LED 2 (M1313)
LED 3 (M1314)
LED 4 (M1315)
LED 1 (RIGHT HAND) (M1316)
Default values: LED 1 (LEFT HAND) = CLOSING BLINK
LED 2 = TORQUE FAULT (CLOSE)
LED 3 = THERMO FAULT
LED 4 = TORQUE FAULT (OPEN)
LED 5 (RIGHT HAND)= OPENING BLINK
Information Table 10, page 27 describes the signals which can be assigned to the LEDs.
Table 10 applies to both the LEDs and the output contacts.
20
Actuator controls
AUMATIC AC 01.1/ACExC 01.1 Profibus DP Manual
EDIT M1312
LED 1 (LEFT HAND)
CLOSING BLINK
:EDIT ¿:OK C:ESC
To Next Page
Loading...
