1.2 Range of application
AUMA actuator controls are exclusively designed for the operation of AUMA
actuators.
Other applications require explicit (written) confirmation by the manufacturer.
The following applications are not permitted, e.g.:
.
motor activation
.
pump activation
No liability can be assumed for inappropriate or unintended use.
Obser
vance of these operation instructions is considered as part of the
device’s designated use.
1.3 Warnings and symbols
The following references and symbols are used in these instructions:
Potentially hazardous situation. Failure to observe this warning may result in
property damage.
Information The term Information preceding the text indicates important notes and
information.
For assembly, operation, and commissioning, observe the additional safety
and warning instructions of the reference documents (page 2).
Symbol for CLOSED.
Symbol for OPEN.
Æ
Via the menu to parameter
Describes the path within the menu to the parameter. By using the push but-
tons of the local controls you may quickly find the desired parameter in the
display.
È
Description of the parameter settings/indications
Describes the setting/viewing possibilities of a parameter.
ò
Step by step
Provides a detailed description of each step for setting/viewing the parame-
ter.
6
Actuator controls
AUMATIC AC 01.1/ACExC 01.1 Profibus DP Manual
NOTICE
To Next Page
Loading...
Need help?
General
