AUMA Aumatic AC 01.1 - 3.6 Language & Contrast Settings

3.6 Language change in the display
Æ
Via the menu to parameter:
MAIN MENU (M0)
LANGUAGE/CONTRAS (M00)
LANGUAGE (M010)
Default value: ENGLISH
Setting range: GERMAN, PORTUGUESE, ITALIAN, SPANISH,
FRENCH, ENGLISH, TUERKCE, POLSKI, MAGYAR
3.7 LCD contrast setting of the display (applies only to controls with green display)
To improve the legibility of the display under unfavourable lighting condi-
tions, the contrast may be adjusted.
This setting is only possible for green displays. The contrast setting has no
effect on the blue display.
Æ
Via the menu to parameter:
MAIN MENU (M0)
LANGUAGE/CONTRAST M00)
LCD CONTRAST (M011)
Default value: 80 %
Setting range: 0%to 100 %
Information Alternatively, the LCD contrast can be set as follows:
1. Press
C and hold it down.
The menus
S, M, D are skipped.
After approximately 10 seconds, the LED display will continuously
change from bright to dark and vice versa.
2. Release push button
The current brightness level is saved.
14
Actuator controls
AUMATIC AC 01.1/ACExC 01.1 Profibus DP Manual
EDIT M010
LANGUAGE
ENGLISH


:EDIT ¿:OK C:ESC
EDIT M011
LCD CONTRAST
30 %


:EDIT ¿:OK C:ESC