AUMA Aumatic AC 01.1 User Manual

6.4.2 EMERGENCY operation: switch on or off/signal behaviour definition
Æ
Via the menu to parameter:
MAIN MENU (M0)
SETTINGS (M1)
EMERGENCY BEHAVIOUR (M16)
EMERGENCY BEHAVIOUR (M1610)
Default value: OFF
È
Description of the parameter settings:
OFF
Emergency operation is switched off.
GOOD SIGNAL FIRST
An EMERGENCY operation is only triggered when the EMERGENCY signal
at the EMERGENCY input drops from 24 V to 0 V, i.e. provided that a 24 V
signal was previously connected to the EMERGENCY input.
ACTIVE IMMEDIATE
An EMERGENCY operation is only initiated if 0 V are connected to the
EMERGENCY signal input.
Information For
ACTIVE IMMEDIATE, an EMERGENCY operation is initiated immedi-
ately after the actuator is switched on, when 0 V are connected to the
EMERGENCY signal input.
6.4.3 Actuator behaviour definition in case of an EMERGENCY operation
Æ
Via the menu to parameter:
MAIN MENU (M0)
SETTINGS (M1)
EMERGENCY BEHAVIOUR (M16)
EMERGENCY POSITION (M1611)
Default value: FAIL AS IS
È
Description of the parameter settings:
FAIL AS IS
The actuator stops in the current position.
FAIL CLOSE
The actuator runs to end position CLOSED.
FAIL OPEN
The actuator runs to end position OPEN.
FAIL TO PRESET
The actuator runs to the predetermined position.
39
Actuator controls
Manual AUMATIC AC 01.1/ACExC 01.1 Profibus DP
EDIT M1610
EMERGENCY BEHAVIOUR
OFF


:EDIT ¿:OK C:ESC
EDIT M1611
EMERGENCY POSITION
FAIL AS IS


:EDIT ¿:OK C:ESC

AUMA Aumatic AC 01.1 Specifications

General

Brand	AUMA
Model	Aumatic AC 01.1
Category	Control Unit
Language	English